STUDY OF HYDRAULIC BASES OF TECHNOLOGICAL FLUIDS CIRCULATION

Artem Pavlychenko¹, Yevhenii Koroviaka², Andrii Ihnatov²

¹Administration, Ecology and Technologies of Environmental Protection Department, Dnipro University of Technology, D. Yavornytskoho Ave. 19, Dnipro, Ukraine, 49005

² Oil-and-gas Engineering and Drilling Department, Dnipro University of Technology, D. Yavornytskoho Ave. 19, Dnipro, Ukraine, 49005

Dnipro University of Technology

Monograph – 212 pages

https://doi.org/10.33271/DUT.004

Full text ( pdf)

ABSTRACT

The scientific work considers the following thematic modules: the state and prospects of development of well drilling technology using various circulation schemes and formulations of cleaning agents; complex criteria determining the rational flow rate of cleaning agent; the essence of surface and volumetric physical and chemical phenomena in the course of circulation processes in wells; factors of influence of washing fluids on physical and mechanical properties of rocks and downhole fracture processes in general; the relationship between physical and geometric properties of rock formations; the interrelationship between the physical and mechanical properties of rock formations and downhole fracture processes.

It is intended for specialists engaged in drilling operations, and will also be useful for students of technical universities, in particular, oil and gas and geological exploration profiles.

Keywords: well drilling technology, cleaning agents, rational flow rate, circulation processes, washing fluids, rocks, downhole fracture processes, ecology safety.

REFERENCES

1. Voitenko, V., & Vitryk, V. (2012). Technology and technique of drilling. Center of Europe.

2. Koroviaka, Ye., Khomenko, V., Vynnykov, Yu., Kharchenko, M., & Rastsvietaiev, V. (2021). Well drilling. NTU "DP".

3. Vaddadi, N. (2015). Introduction to oil well drilling. Bathos publishing.

4. Vyrvinskyi, P., Kuzin, Yu., & Khomenko, V. (2010). Geological exploration and safety. National Mining University.

5. Kotskulych, Ya., & Kochkodan, Ya. (1999). Oil and Gas Drilling. Vik.

6. Dudlia, M. (2011). Flushing fluids in drilling. State Higher Educational Institution "National Mining University".

7. Ihnatov, A.A., & Stavychnyi, Ye.M. (2020). Laboratory and industrial research of cementation process of oil-and-gas bore holes in the conditions of sedimentary rock beds. Tooling materials science, (23), 88–103.

8. Stavychnyi, Ye.M., & Ihnatov, A.A. (2019). Fastening features barrel of bore hole in chemogenic deposits. Rock destruction and metal-working instrument-technique and technology of his making and application, (22), 164–174.

9. Ihnatov, A. O., Haddad, J., Stavychnyi, Y. M., & Plytus, M. M. (2022). Development and Implementation of Innovative Approaches to Fixing Wells in Difficult Conditions. Journal of The Institution of Engineers (India): Series D. https://doi.org/10.1007/s40033-022-00402-5.

10. Pavlychenko A., Ihnatov, A., Koroviaka Ye., et al. (2021). Fundamentals of organizing a hydraulic well cleaning system. Collection of research papers of the NMU, (67), 136–152.

11. Aziukovskyi, O., Ihnatov, A., & Stavychnyi, Y. (2022). Improving the properties of special downhole fluids in field development. Scientific papers of donntu Series: “The Mining and Geology”, (1(27)-2(28)2022), 96–106. https://doi.org/10.31474/2073-9575-2022-1(27)-2(28)-96-106

12. Hossain, M., & Islam, M. (2018). Drilling engineering: problems and solutions. Scrivener publishing.

13. Speight, J. G. (2018). Formulas and Calculations for Drilling Operations. Wiley & Sons, Limited, John.

14. Pavlychenko, A.V., Koroviaka, Ye.А., Ihnatov, A.О. & Davydenko, A.N. (2021). Hydro-gas-dynamic processes during the construction and operation of wells. Dnipro University of Technology.

15. Ihnatov, A. O., Koroviaka, Y. A., Pinka, J., Rastsvietaiev, V. O., & Dmytruk, O. O. (2021). Geological and mining-engineering peculiarities of implementation of hydromechanical drilling principles. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 11–18. https://doi.org/10.33271/nvngu/2021-1/011

16. Azar, J. J., & Samuel, G. R. (2007). Drilling Engineering. PennWell Corp.

17. Pavlychenko, A. V., Ihnatov, A. O., Koroviaka, Y. A., Ratov, B. T., & Zakenov, S. T. (2022). Problematics of the issues concerning development of energysaving and environmentally efficient technologies of well construction. IOP Conference Series: Earth and Environmental Science, 1049(1), 012031. https://doi.org/10.1088/1755-1315/1049/1/012031

18. Kotskulych, Ya.S., & Tyshchenko, O.V. (2004). Well completion. Interpres LTD.

19. Chudyk, I., Bohoslavets, V., & Dudych, I. (2016). Biopolymer Silicate Drilling Fluid for Horizontal Well Drilling. Prospecting and development of oil and gas fields, 4(61), 34–42.

20. Modi, P., & Seth, S. (2004). Fluid mechanics and hydraulic machines. Standard Book House.

21. Falkovich, G. (2011). Fluid Mechanics: A Short Course for Physicists. Cambridge University Press.

22. Pavlychenko, A. V., Ihnatov, A.О. & Stavychnyi, Y. M. (2023). Features of technical and technological support for well casing and cementing operations. Tooling materials science, (26), 80–92.

23. Ihnatov, A.О. & Stavychnyi, Y. M. (2022). Some issues of flushing technologies and well casing in difficult conditions. Tooling materials science, (25), 119–132.

24. Ihnatov, A.О. & Stavychnyi, Y. M. (2021). Geological and technical-andtechnological features of casing oil and gas wells, taking into account the physical and chemical state of their wellbore. Tooling materials science, (24), 87–102.

25. Stavychnyi, Ye. M., Fem’iak, Ya. M., Tershak, B. A., Ihnatov, A. O., Rybachuk, S. A., Bochkur, Yu. V., & Savchuk, N. M. (2023). Modern domestic technological equipment for fixing wells with liners with column-filter. Prospecting and Development of Oil and Gas Fields, (1(86)), 54–63. https://doi.org/10.31471/1993-9973-2023-1(86)-54-63

26. Chudyk, I., Dudych, I., & Tokaruk, V. (2020). Simulation of the well flushing process. Prospecting and Development of Oil and Gas Fields, 2(75), 62–68.

27. Ihnatov, A., Koroviaka, Y., Rastsvietaiev, V., & Tokar, L. (2021). Development of the rational bottomhole assemblies of the directed well drilling. E3S Web of Conferences, 230, 01016. https://doi.org/10.1051/e3sconf/202123001016

28. Koroviaka, Y. A., Ihnatov, A.О., Davydenko, A.N., & Mekshun, M. R. (2023). Analysis of some properties of drilling mud and their influence on well drilling process indicators. Tooling materials science, (26), 58–68.

29. Caenn, R., Gray, G., & Darley, H. (2020). Composition and Properties of Drilling and Completion Fluids. Publisher: Gulf Professional Publishing.

30. Koroviaka, Y. A., Mekshun, M. R., Ihnatov, A. O., Ratov, B. T., Tkachenko, Y. S., & Stavychnyi, Y. M. (2023). Determining technological properties of drilling muds. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 25–32. https://doi.org/10.33271/nvngu/2023-2/025

31. Skalle, P. (2015). Drilling fluid engineering. Publisher: bookboon.com isbn 978-87- 403-1139-6.

32. Dalal, M. (2018). Physical Chemistry. Publisher: Dalal Institute.

33. Tahir, M. B., Sagir, M., Mushtaq, M., Tahir, M. S., & Shaik, A. R. (2020). Surfactants for Enhanced Oil Recovery Applications. Springer.

34. Ihnatov, A. O. (2020). To the question of determining bottom-hole performance characteristics of hydromechanics drilling devices. Tooling materials science, (23), 78– 88.

35. Ihnatov, A. O., Koroviaka, Y. A., Haddad, J., Tershak, B. A., Kaliuzhna, T. M., & Yavorska, V. V. (2022). Experimental and theoretical studies on the operating parameters of hydromechanical drilling. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 20–27. https://doi.org/10.33271/nvngu/2022-1/020

36. Bansal, R.K. (2010). Hydraulics and fluid mechanics. Laxmi Publications LTD.

37. Kumar, D.S. (2009). Fluid mechanics and fluid power engineering. Publisher: S K Kataria and Sons.

38. Milap, G. (2017). Mud Engineering Simplified. Publisher: BecomeShakespeare.com.

39. Pashchenko, O.A., Ihnatov, A.О., & Vladyko, O.B. (2021). Some features of rock destruction at the bottom of the well. Tooling materials science, (24), 121–134.

40. Ihnatov, A., Pashchenko, A., Koroviaka, Ye., Semekhin, Yu., Logvinenko, O., & Askerov, I. (2021). Some explanations of the impact mechanism on rocks when drilling wells. Collection of research papers of the NMU, (66), 177–192.

41. Guan, Z., Chen, T., & Liao, H. (2021). Theory and Technology of Drilling Engineering. Springer Singapore. https://doi.org/10.1007/978-981-15-9327-7

42. Pavlychenko, A., Ihnatov, A., & Askerov, I. (2022). Ways to intensify downhole processes of rock destruction during well construction. Scientific papers of donntu series: “The Mining and Geology”, (1(27)-2(28)2022), 87–95. https://doi.org/10.31474/2073-9575-2022-1(27)-2(28)-87-95

43. Davydenko, О., & Ihnatov, A. (2020). Research into influence of filtrate mud liquids on rocks swelling processes. Tooling materials science, (23), 36–49.

44. Austin, E.H. (2012). Drilling Engineering. Publisher: Springer Science & Business Media.

45. Koroviaka, Y. A., & Ihnatov, A. O. (2020). Features of hydraulic conveying removable core receiver. Tooling materials science, (23), 103–114.

46. Koroviaka, Y. A., & Ihnatov, A. O. (2020). Advanced well construction technologies. Dnipro University of Technology.

47. Ouadfeul, S.-A., & Aliouane, L. (2020). Oil and Gas Wells. IntechOpen. https://doi.org/10.5772/intechopen.78185

48. Speight, J. G. (2013). Heavy Oil Production Processes. Elsevier Science & Technology Books.

49. Looyeh, R., & Aadnoy, B. (2011). Petroleum Rock Mechanics: Drilling Operations and Well Design. Elsevier Science & Technology Books.

50. Davidenko, A., & Ighnatov, А. (2016). Basic results of researches of lining and plugging processes at wells construction. Metallurgical and Mining Industry, 9, 58–64.

51. Aziukovskyi, O., Koroviaka, Y., & Ihnatov, A. (2023). Drilling and operation of oil and gas wells in difficult conditions. Zhurfond

52. Jeffery, W.H. (2015). Deep Well Drilling: The Principles and Practices of Deep Well Drilling. Publisher: Palala Press.

53. Ping, W.L. (2016). Foam drilling cycle theory and practice. Publisher: Petroleum Industry Press.

54. Terry, R.E., Rogers, J.B., & Craft, B.C. (2014). Applied Petroleum Reservoir Engineering. Publisher: Prentice Hall.

55. Lopez, J.C., Lopez, J. E., & Javier, F. (2017). Drilling and blasting of rocks. CRC Press Taylor & Francis.

56. Zhang, Z.-X. (2016). Rock Fracture and Blasting: Theory and Applications. Elsevier Science & Technology Books.

57. Papushyn, Yu., Smyrnov, V., & Biletskyi, V. (2006). Study of mineral resources for enrichment. Skhidnyi vydavnychyi dim.

58. Guhey, R. (2017). Geology. Publisher: Imprint NIPA.

59. Mukerji, T., Dvorkin, J., & Mavko, G. (2019). Rock Physics Handbook. Cambridge University Press.

60. Ihnatov, A. (2021). Analyzing mechanics of rock breaking under conditions of hydromechanical drilling. Mining of Mineral Deposits, 15(3), 122–129. https://doi.org/10.33271/mining15.03.122

61. Vakarchuk, S. O., Demkiv, T. M., & Miahkota, S. V. (2010). Physics. University of Lviv.

62. Ihnatov, A. O., Koroviaka, Y. A., & Rastsvietaiev, V. O. (2021). Features of drilling operations during engineering surveys and preparation of territories. Tooling materials science, (24), 102–113.

63. Suiarko, V., Serdiukova, O., & Sukhov, V. (2013). General and Petroleum Geology. National University of Kharkiv.

64. Ihnatov, A. (2021). Hydraulic programme of well shaft cleaning as a factor of accident-free process of shaft sinking. Promising scientific researches of Eurasian scholars.

65. Haldar, S. K. (2013). Introduction to Mineralogy and Petrology. Elsevier.

66. Islam, M. R., & Hossain, M. E. (2020). Drilling Engineering. Elsevier Science & Technology Books.

67. Hatami, M. J. (2017). Oilfield Survival Guide, Volume One: For All Oilfield Situations. Oilfield Books, LLC.

68. Liakhov, Yu., Pavlun, M., & Tsikhon, S. (2011). Geology of Minerals. University of Lviv.

69. Smyrnov V.I. (1995). Geology of Minerals. Vyshcha shkola.

70. Hurskyi, D., Yesypchuk, K., & Kalinin, V. (2006). Metallic minerals of Ukraine. Tsentr Yevropy.

71. Sheng, J. (2010). Modern chemical enhanced oil recovery: Theory and practice. Gulf Professional Pub.

72. Sonnenberg, S. A., & Selley, R. C. (2014). Elements of Petroleum Geology. Elsevier Science & Technology Books.

73. Andal, M., & Rao, T. (2018). Strength of Materials. Cambridge University Press.

74. Ihnatov, A. O. (2021). Establishment of the basic principles of functioning of individual units of devices for hydro(pneumatic)mechanical drilling. Tooling materials science, (24), 76–87.

75. Ihnatov, А. О., & Askerov, І. К. (2021). The problematic issues concerning modern well drilling technologies. Molod: nauka ta innovatsii (541–542).

76. Davydenko, A.N., & Ihnatov, А. О. (2019). Mechanics of effective destruction of rocks by chain-drilling bits rollingcutter. Rock destruction and metal-working instrument-technique and technology of his making and application, (22), 148–157.

77. Fink, J. (2003). Oil Field Chemicals. Gulf Professional Publishing.

78. Sharma, K.K. & Sharma, L.K. (2016). Physical Chemistry. Publisher: Vikas Publishing.

79. Bansal, R. K. (2005). A Textbook of Strength of Materials. Laxmi Publications.

80. Carmichael, R. S. (2017). Practical Handbook of Physical Properties of Rocks and Minerals (1988). Taylor & Francis Group.

81. Schreiber, E., & Liebermann, R. C. (1994). Experimental Techniques in Mineral and Rock Physics: The Schreiber Volume. Birkhauser.

82. Donaldson, E. C., & Tiab, D. (2015). Petrophysics: Theory and Practice of Measuring Reservoir Rock and Fluid Transport Properties. Elsevier Science & Technology Books.

83. u uen, Y. (1994). Introduction to the physics of rocks. Princeton University Press.

84. Ihnatov, А. О. (2023). Study of technological features of the implementation of the hydromechanical drilling method. Tooling materials science, (26), 39–49.

85. Stacey, F. D. (2008). Physics of the earth. Cambridge University Press.

86. Ihnatov, А. О. (2015). Drilling device (Patent of Ukraine № 109273). Ukrainian Institute of Industrial Property.

87. Ihnatov, А.О. (2016). Device for shot drilling (Patent of Ukraine № 111350). Ukrainian Institute of Industrial Property.

88. Ihnatov, А. О. (2022). Study of technological features of the implementation of the hydromechanical drilling method. Tooling materials science, (25), 53–65.

89. Ihnatov, А.О., & Viatkin, S.S. (2013). Impact drill for well drilling (Patent of Ukraine № 102707). Ukrainian Institute of Industrial Property.

90. Ihnatov, А.О., & Viatkin, S.S. (2013). Impact drill for well drilling (Patent of Ukraine № 102708). Ukrainian Institute of Industrial Property.

91. Ludema, K. C. (1996). Friction, wear, lubrication: A textbook in tribology. CRC Press.

92. Ludema, K. C., & Ajayi, O. O. (2018). Friction, Wear, Lubrication. CRC Press. https://doi.org/10.1201/9780429444715

93. Hutchings, I., & Shipway, P. (2017). Tribology: Friction and Wear of Engineering Materials. Elsevier Science & Technology Books.

94. Vambol, S., Mishchenko, I., & Kondratenko, O. (2016). Technical Mechanics of Liquid and Gas. National University of Civil Defence of Ukraine.

95. Slobodianiuk, O. V. (2016). Mechanics. Vydavnycho-polihrafichnyi tsentr "Kyivskyi universytet".

96. Pavlovskyi, M. (2002). Theoretical Mechanics: Statics of an absolutely rigid body. Kinematics. Dynamics, Fundamentals of Analytical Mechanics. Tekhnika.

97. Kuzo, I. V., Shpachuk, V. P., & Vankovych, N. M. (2017). Theoretical Mechanics. Folio.

98. Mysliuk, M., Rybchych, I., & Yaremiichuk, R. (2002). Wells Drilling: Handbook: in 5 volumes. T. 1: General information. Drilling rigs. Equipment and tools. Interpres LTD.

99. Bhavikatti, S. (2002). Strength of Materials. Vikas Publishing House Pvt Limited.

100. Rudko, H., Adamenko, O., Chepizhko, O., & Krochak, M. (2010). Geology with the basics of geomorphology. Bukrek.

101. Kucheruk, I. M., & Horbachuk, I. T. (2006). General course of physics. Tekhnika.

102. Haghi, A. K. (2020). Physical Chemistry and Its Interdisciplinary Applications. Nova Science Publishers, Incorporated.

103. Venher, Ye., & Bushok, H. (2003). Physics course. Vyshcha shkola.

104. Lebid, V. (2005). Physical chemistry. Folio.

105. Atkins. (2010). Physical Chemistry (Sale Fcc). Freeman & Company, W. H.

106. Lastukhin, Yu., & Voronov, S. (2009). Organic chemistry. Tsentr Yevropy.

107. Yatsymyrskyi, V. (2007). Physical chemistry. Irpin: VTF «Perun».

108. Mysliuk, M., Rybchych, I., & Yaremiichuk, R. (2004). Well Drilling: Handbook: in 5 vols. Vol. 3: Vertical and directional drilling. Interpres LTD.

109. Kostrzhytskyi, A., Kalinkov, O., Tishchenko, V., & Berehova, O. (2008). Physical and colloidal chemistry. Tsentr uchbovoi literatury.

110. Homonai V. (2007) Physical and colloidal chemistry. Nova knyha.

111. Voloshynets, V. A. (2017). Physical and colloidal chemistry. Lviv Polytechnic.

112. Kovalchuk, Ye. P., & Reshetniak, O. V. (2007). Physical chemistry. Vydavnychyi tsentr LNU imeni Ivana Franka.

113. Chumak V.L. & Ivanov, S. V. (2007). Physical chemistry. National Aviation University.

114. Pavlov, H. H. (2014). Petrography. Kyivskyi un-t.

115. Yavorskyi, V. (2016). Fundamentals of theoretical chemistry. Lviv Polytechnic

116. Dmytriv, H.S., & Pavliuk, V.V. (2008). General and inorganic chemistry. Vydavnychyi tsentr LNU im. Ivana Franka.

117. Zapolskyi, A., Mishkova-Klymenko, N., & Astrelin, I. (2000). Physico-chemical fundamentals of wastewater treatment technology. Libra.

118. Kondrachuk, M., Khabutel, V., Pashechko, M., & Korbut, Ye. (2009). Tribology. National Aviation University.

119. Yasmin, A., & Yasin, M. (2017). Advanced Practical Physical Chemistry. Noor Publisher.

120. Bahl, B., Tuli, G., & Bahl, А. (2000). Essentials of Physical Chemistry. S Chand & Co.

121. Ahmed, T. (2010). Reservoir Engineering Handbook. Elsevier Science & Technology Books.

122. Pelevin, L.Ye., Mishchuk, D.O., & Rashkivskyi, V.P. (2015). Hydraulics, hydraulic machines and hydropneumatic automation. Kyiv National University of Construction and Architecture.

123. Buhrii, O., Protsakh, N., & Buhrii, N. (2011). Fundamentals of differential equations: theory, examples and problems. I. Chyzhykov.

124. Ihnatov, A., & Askerov, I. (2022). Study the possibilities of application impact pulses in construction of wells. Collection of Research Papers of the National Mining University, 69, 206–2017. https://doi.org/10.33271/crpnmu/69.206

125. Kondrachuk, M.V., Khabutel, V.F., Pashechko, M.I., & Korbut, Ye.V. (2009). Tribology. National Aviation University.

126. Hashchuk, P.M. (2002). Linear dynamical systems and ordinary differential equations. Ukrainski tekhnolohii.

127. Smyrnov, V.O., & Biletskyi, V.S. (2012). Preparatory processes of mineral ore beneficiation. Skhidnyi vydavnychyi dim, Donetske viddilennia NTSh.

128. Rosen, M. J., & Kunjappu, J. T. (2012). Surfactants and Interfacial Phenomena. John Wiley & Sons, Inc. https://doi.org/10.1002/9781118228920

129. Davydenko, O.M., Ihnatov, A.O., & Naumenko, M.O. (2018). A study of the state of column is at cementation of bore holes. Tooling materials science, (21), 113–119.

130. Kopilevych, V., Karnaukhov, O., Melnychuk, D., Slobodianyk, M., Skliar, S., & Chebotko, K. (2003). General and inorganic chemistry. Feniks.

131. Pavlychenko, A., Ihnatov, A., Koroviaka, Ye. A., & Askerov, I. K. (2023). Basic technical, technological and ecological aspects of the construction production wells. Instrumentalne materialoznavstvo, (26), 68–79.

132. Hapich, H., Andrieiev, V., Kovalenko, V., Hrytsan, Y., & Pavlychenko, A. (2022). Study of fragmentation impact of small riverbeds by artificial waters on the quality of water resources. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 185– 189. https://doi.org/10.33271/nvngu/2022-3/185

133. Kolesnyk, V., Pavlychenko, A., & Buchavyi, Yu. (2018). Unified methodology of comprehensive assessment of the level of ecological hazard of industrial objects and efficiency of implementation of environmental protection technologies. Technogenic and Ecological Safety, 3(1), 64–69.

134. Buzylo, V., Pavlychenko, A., & Borysovska, O. (2020). Ecological aspects of filling of worked-out area during underground coal mining. E3S Web of Conferences, 201, 01038. https://doi.org/10.1051/e3sconf/202020101038

135. Pavlуchenko, A. (2020). Forecastin of atmospheric air pollution rates from drillin and blasting operations on iron mining quarries. Collection of Research Papers of the National Mining University, 61, 129–142. https://doi.org/10.33271/crpnmu/61.129

136. Mysliuk, M., Rybchych, I., & Yaremiichuk, R (2004). Drilling of the wells. Handbook: in 5 volumes. T. 5: Complications. Accidents. Ecology. Interpres LTD.

137. Adamenko, O., & Rudko, H. (1997). Environmental Geology. Manuskrypt.

138. Hoshovskyi, S., Rudko, H., & Presner, B. (2002). Ecological safety of technogenic geosystems in connection with the catastrophic development of geological actions. ZAT “NIChLAVA”.

139. Robertson, J.O., & Chilingar, G.V. (2017). Environmental Aspects of Oil and Gas Production. John Wiley & Sons, Inc. https://doi.org/10.1002/9781119117421.

140. Patin, S.A. (1999). Environmental impact of the offshore oil and gas industry. EcoMonitor Pub